| || |
On $50 and up. The more you buy, the more you save! (details)
10-micron Carbon Block Filter Cartridge 2.5"x10"
CB10-2510 10" Carbon Block Cartridge (10 micron rating) for Chlorine, Taste & Odor Reduction
This CB10-2510 is a 2.5"x9.875" Carbon Block (CB) water filter cartridge. The CB cartridge is also known as CTO cartridge, because it removes chlorine (C), taste (T) and odor (O). It will also remove organic matter from water by adsorption.
The 10-micron cartridge will also remove sediments and suspended matter larger than 10 microns (nominal filtration rating). Flow in this cartridge is radial and flow rate in the filter should not exceed 0.75 gpm for optimal performance. The filtration takes place without channeling, fluidizing, bypassing or release of carbon fines.
Carbon used is 100% from coconut shell. This carbon block is wrapped with polyethylene outer netting. The nitrile butadiene rubber (Buna-N) gaskets seal the cartridge against the 10" standard housing. The manufacturer is certified for ISO 9001:2000 Standard and this carbon block filter cartridge meets industry standards for quality assurance.
This cartridge is used as a second stage in the 100 GPD Reverse Osmosis system. It is also used in the 3-stage undersink filter system.
Service Life: 2500 gallons. Thus, the filter will reduce free available chlorine at 2 parts per million (ppm) by at least 90% in up to 2,500 gallons at a flow rate of 0.75 gpm.
Replace the cartridge with the other cartridges in the same system every 6-12 months.
This cartridge is compatible with: Hydronix CB-25-1010, Pentek EPM-10, EP-10, WHEF-WHWC, Sears/Kenmore 34370, Watts PWCB10S, Omni GAC1-SS, KX Industries USA 32-250-125-975
SKU: CB10-2510 ___ UPC: 852869004572